SCX6 Front battery mount

This is a bracket for the SCX6 that allows you to reuse the rear battery tray up front (or any other stock tray with the ends removed). This is intended to be a place for a dedicated steering servo battery for those who may run a 4S direct power servo. Its not really meant to be the spot for your main battery as its pretty small.

The battery tray ends up with 36mm front to back and 96mm side to side.

This requires that you shave the the two rear most fake bolt heads off of the top of the front crossmember for clearance, there's 1 on each side. see the picture above.

You will reuse the M3 x 8mm flathead screws to mount the stock tray to the printed bracket.

You will also need two M4 x 8-14mm button head (or socket head) screws to mount the bracket to the bottom side of the front crossmember. the two rear most holes on each side are the mount points, these should be drilled out to 3.5mm or 9/64" for the M4 screw but you may get away with not drilling it out (stop when you hi