SCX6 plow

SCX6 plow

Try out these test files! Get the entire plow here: https://cults3d.com/en/3d-model/various/scx6-plow

I have designed this plow for the SCX6. The blade reaches a size of 15.5 (394mm) wide. This does limit a print to some bed that have a 400mm build value. However, I have split the blade and blade mount into two files. These have a 2mm x 202mm and 2mm x 101mm holes that run through it. This will allow you to print in two separate files, insert (up to) 1.8mm steel rod in each hole, and glue together. The steel rods are to ensure the glue join will hold. I recommend Bob Smith Industries CA glue and it should hold well with this, but the steel rods will ensure that there is minimal flex and break around the join.

I have also included files for the arm, blade, and blade mount to allow for steel rod inserts for additional strength.


Suggested filament:
PETG, ASA, or ABS

Shopping list:
Bolts
- M5 x 30mm - 4ea - connects blade to mount
- M4 x 20mm - 1ea - connec