Scyrox V8 Bottom Shell Replacement & Weight Mod

Bottom Shell for Scyrox V8This replacement shell has 3 variants (all weights given for my calibrated PLA prints):Normal Shell: comes in at around 5.7g and has no holes. - "Stable"Light Shell: comes in at around 5.25g, has holes that are covered with thin layers. - “Hybrid”Superlight Shell: comes in at around 5.0g, has holes. - “Lightweight”For comparison, my original bottom shell of the Scyrox V8 Mouse came in at 6.5g.AssemblyJust place the PCB onto the holes, exactly as with the original bottom shell. Screw in the four original screws and turn them until they squeeze the PCB a little bit - that is enough. The PCB should sit tight. The front part should sit on the front screw holes, without space between PCB and the screw hole. Now put the mouse back together. Do not overtighten the screws.IF your PCB wobbles up and down in the front, take it out and bend it downwards a bit before inserting it again. SkatesI recommend to use Dot-Skates instead of full sized skates with the ligh