Sea Turtle

HueForge Project: Sea Turtle. One of my favorite animals! My included print profile is set up and ready to print. The slicer settings are important so please do not modify them. It will print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Model thickness/mesh height is 1.68mm. I have a height range modifier enabled as well to save a bit of print time. Please do not alter any slicer settings. The Model is 150x150mm in size. You can scale it to 200x200mm on the x and y axis if desired. Do not scale the z axis. Filaments I Used and Recommend:PLA BambuLab Basic Black —Transmission Distance: 0.6PLA BambuLab Basic Cyan —Transmission Distance: 3.5PLA BambuLab Basic Sunflower Yellow —Transmission Distance: 4.4PLA BambuLab Basic Jade White —Transmission Distance: 5 This print uses 4 unique Bambu Lab filaments. The final product will vary with different brands, colors and opacities of filament. **Not all blue and yellow combos will produce the green that the cyan and s