Seahorse Dragon

by Corp · Art

142 Downloads

28 Likes

0 Makes

Go to Model

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #14 (1.2mm) swap to Red At layer #22 (1.84mm) swap to Jade White for the rest.

Corp also publishes on

299 additional models across 1 more platforms

MakerWorld

299 models

♥ 7,476 ↓ 7,888 ⚒ 1,924

Frequently Asked Questions

Which 3D printer is suitable for Seahorse Dragon?

Any FDM printer should handle Seahorse Dragon just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Seahorse Dragon need supports when printing?

Yes, Seahorse Dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Seahorse Dragon available in?

Seahorse Dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Seahorse Dragon free to download?

Yes, Seahorse Dragon is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Seahorse Dragon

Similar Models

Add to Collection