Seal clips - Three sizes

一种密封夹，可以用于夹紧零食等塑料带，以防受潮。无需任何非3D打印件，使用直径1.75毫米、长度14mm的耗材作为转轴，装好后把转轴两端用电烙铁加热后按压，使其稍微变粗，就不会从孔中掉出来了，参考最后一张图片中红圈处。一共提供了3种规格，分别为60mm、100mm、140mm。图片中是100mm规格的。建议中国的朋友访问中国站浏览和下载，速度更快：https://makerworld.com.cn/zh/models/493647#profileId-416812A sealing clip that can be used to clamp plastic bands such as snacks to protect them from moisture. There is no need for any non-3D printed parts, use a filament with a diameter of 1.75 mm and a length of 14mm as the hinge, and heat both ends of the hinge with an electric soldering iron and press it to make it slightly thicker and not fall out of the hole, refer to the red circle in the last picture.A total of 3 sizes are available, namely 60mm, 100mm, and 140mm. In the picture, it is a 100mm format.Boost Me如果对您有用，请给我助力。谢谢！If it works for you, please give me a boost. Thank you!