Slicer Discord
secret box – 3D-Druckmodell von Thingiverse Thingiverse

secret box

257 Downloads
226 Likes
0 Makes
Zum Modell
A box that can only be opened with the magnetic key. Nothing is visible from the outside.
You need 2 screws M3 x 24 and 6 magnets: 2x Ø10 x 2; 2x Ø3 x 3; 2x 10 x 5 x 5.
The 2 small magnets repel the Ø10 and act like a spring. The strong rectangular magnets overcome the smaller magnetic force and attract the Ø10 discs - thus unlocking the box. The latches are mounted on the left and right so that the lock cannot be opened simply by tapping. It is important to pay attention to the polarity of the magnets, otherwise the opening and closing will not work.

https://youtu.be/R36d4f-hjBo
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen