Secretlab Magnetic Cable Anchor

Remixed the best anchor I found on MakerWorld with the following:Logo:Swapped out the cable icon with triangle icon that's ready for AMS use.Magnet Super Saiyan Strength:Deepened the recess to hold 4x 20x5x2mm bar magnets for a powerful attachment to your desk.I tried a stack of 5 but it was producing worse exterior results in the final print. (Basically the hull layer line that most/all Benchies have.) I also tried using a single 20x10x5mm bar instead of a stack of 4 or 5, but the polarity was horizontal instead of vertical and although it worked, it didn't match the same configuration used in the official Secretlabs anchors. Stacks of 4x of the 20x5x2mm works great, matches SL anchors and holds really well.Design:Shortened the overall height to match the Secretlab anchors. (They have a little less than 1mm of the magnet exposed.)Clean-up:Removed the magnet recess side-gap from original model as it isn't needed and would show up in the exterior walls as an imperfection.Magnets used: 2