Seeed Grove High Current Relay Case

I needed a relay to control a low voltage light and had this component sitting about, and its much nicer with these things in enclosures so I made this! There is a screw mount, a 12mm pipe mount (yes its weird, I needed this one!) and a basic case available. The screw mount option has 5mm holes for the screws to go through. If you are using this in ESPHome here is an example where I am using it to control LED lighting. Your pin will likely differ.output: - platform: gpio pin: GPIO8 id: l1 light: - platform: binary name: “LED Lighting” output: l1Required For Assembly6x M2x6 screws3x M2 washers6x M2 Ruthex/CNC Kitchen inserts (plus 4 if using the 12mm pipe mount)Soldering ironSeeed Grove High Current Relay(12mm pipe mount option only) extra 4x M2x8 screws + 4x M2 washersDue to the depth and position of the M2 inserts in this build it may be easier to use the normal soldering iron tip rather than the proper Ruthex/CNC Kitchen insert tools for the inserts in the bottom of the case. Do not