Seeed Grove Temperature & Humidity Sensor Pro Case

Using this in a project and it needs a case, so here it is with a few variants including a screw mount, magnetic mount and a basic case. If you plan to use this with ESPHome, the following is a working config example, note your pin will likely be different:sensor: - platform: dht pin: GPIO7 temperature: name: “Workshop Temperature” humidity: name: “Woroshop Humidity” update_interval: 30sRequired For Assembly5x M2x6 screws3x M2 washers5x M2 CNC Kitchen/Ruthex or similar sized insertsGrove - Temperature & Humidity Sensor Pro (DHT22/AM2302)Soldering ironThe magnetic case variant requires 2x 8x2mm disc magnets. The screw mount version has a 5mm hole in the case for a screw.AssemblyInstall 5x M2 inserts into the holes as pictured.If you are using the magnetic base, put a small dab of blue in the holes and poke in the magnets now.If you are using the screw mount version, screw it into its final destination now. Use a washer.Insert the PCB and secure it with two M2x6 screws. Do not use washer