Seeed Studio ODYSSEY NAS case

This is an all-in-one NAS case to be used with SeeedStudio Odyssey (aka re_computer) single board computer. It utilizes the original alumininum case that came with the computer.
It fits power supply, odyssey sbc, two 92mm fans and up to three 3.5 HDDs.
This case is quite tall - almost 30cm (31 with extended top), but it seems stable.
The whole structure is held together by four M3 threaded rods, so the printed parts (except the HDD brackets) do not bear any significant weight.

The case was quite hard to assemble with the original top part - there is not much room for HDD cables. I created an extended version that is 10mm taller and would recommend using it instead.

Also I would recommend printing with 100% infill for more noise dampening. It should not consume much more material as this thing is almost all walls ant not much infill.

NOTE that the ODDYSEY can only power two 3.5 HDDs, the third one will have to be powered directly from the PSU and will need a small DC-DC converter to