Sekiro vs Genichiro

A beautiful rendition of Sekiro the Wolf vs Genichiro AshinaArtwork by Natty Dread Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm The Model is 158.38x250mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 2.3mm and the Actual Depth is 2mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Red Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #18 (1.18mm) swap to Red At layer #28 (1.78mm) swap to Jade White for the rest.