Self-Orienting Ratchet Socket Wrench

This socket wrench chooses the correct ratcheting direction on its own when you start using it! All you need to do is reset it with the switch afterwards. Gone are the days of ratcheting the wrong way!

Printed with 0.15mm clearances and 0.2mm layer height, 10-20% infill for all parts.
2 walls and 4 top/bottom layers. Elephant's foot is a big issue for this design, make sure your printer is well-calibrated.

Assembly:
1. Insert both halves of the BIG PIN into the larger hole in the FRAME.
2. Press the ANVIL onto the BIG PIN, making sure to align the through holes.
3. Insert a 1 inch length of filament all the way through the holes to pin the ANVIL to the BIG PIN. This step cannot be reversed.
4. Insert both halves of the SMALL PIN into the smaller hole in the FRAME.
5. Press the PAWLS onto the SMALL PIN, making sure that the two arms are spaced apart by two ANVIL teeth when centered.
6. Press the CAP onto the FRAME, making sure that the handle end of the FRAME sits snugly in