Thingiverse
Self Watering Pot
1k
Descargas
2.4k
Likes
2
Makes
A self watering pot in a space-efficient, awesome square shape.
120x120x150mm / (4.7x4.7x5.9'') external.
and
120x120x100mm (4.7x4.7x3.9'') external.
Scaling it down will work, since wall thicknesses are 2mm - Upper, 2.5mm - Lower.
Just be sure that it has at least two perimeters.
A few suggestions:
1. Don't use PLA if you gonna use it anywhere near direct sunlight;
2. Use either "random" or aligned seam alignment for a higher chance of water-tightness, as well as 101-104% flow.
3. Printing orientation just like on the pictures and in the stls. Z up.
Step file attached. Stls are lame.
Feel free to comment. Any criticism is welcome.
By now comment section has also become FAQ of sorts. So you may find something useful there.
And if you need something like this made or rendered for you, find me on Upwork
120x120x150mm / (4.7x4.7x5.9'') external.
and
120x120x100mm (4.7x4.7x3.9'') external.
Scaling it down will work, since wall thicknesses are 2mm - Upper, 2.5mm - Lower.
Just be sure that it has at least two perimeters.
A few suggestions:
1. Don't use PLA if you gonna use it anywhere near direct sunlight;
2. Use either "random" or aligned seam alignment for a higher chance of water-tightness, as well as 101-104% flow.
3. Printing orientation just like on the pictures and in the stls. Z up.
Step file attached. Stls are lame.
Feel free to comment. Any criticism is welcome.
By now comment section has also become FAQ of sorts. So you may find something useful there.
And if you need something like this made or rendered for you, find me on Upwork
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
