SENNHEISER 58X PLANAR MOD

T50RP in an HD58x shell
This is a niche mod for those of you who have access to a 3d printer AND have a 58x and t50rp drivers, but for those of you who do i recommend you try this.
This takes the grainy hd58x and the bland sound signature of the T50RP and makes something useful from them both.

Modding the Grill:
-Remove the metal grill by gently pulling on the plastic ring it is attached to at the top of the driver. If you have troubles with this you can also remove the grill from the front by removing the pads and foam from the front, then sticking a screw driver through one of the holes towards the sides of the headphone to push the metal grill off from the back.
-Remove the metal grill from its plastic ring, the original plastic ring will not fit with this mod, you will need to print the included modified "senny cup ring" model(print it twice, once mirrored).
-Insert the metal grills into the new "senny cup rings" if yours doesn't have an interference fit then you may need t