Sensor Box DIY (temp/humi/co2)

Here is a very nice little project to realize: A Sensor Box.This small box, allows to control the temperature, humidity, as well as the level of CO2 in the air. In addition, all data is visible from a website hosted by ESP32 locally. Here are the components you will need to realize this project! All links of components used are belowESP32 SCD40/41BatteryFemale DC ConnectorSwitch 3 pinsStep 1 : Place the battery with a little hot glue in a cornerStep 2 : Place the DC Connector with some hot glue on the side to keep it in the intended location Step 3 : Put the Switch 3 pin in the hole provided for this purposeStep 4 : Solder the 3 pin Switch wires to the ESP32 power pinsStep 5 : With hot glue, glue the ESP32 against the bottomStep 6 : Place the SCD40/41 sensor against the wall where the small ventilation holes are locatedStep 7 : Connect the battery to the Switch 3 pinsStep 8 : Enjoy !!! <img c