Thingiverse
Sentinel Stock
von Arekin
43
Downloads
49
Likes
1
Makes
Extended Stock With Cheek rest
McMaster Carr Parts List
2 x 93635A204 - 10mm bolt, 10 mm head
1x 93635A241 - 60mm bolt, 10 mm head
3 x 91828A251 - 10 mm nut
8538K16 - ~6 inches of 3/8 in nylon rod.
EVA foam padding is preferable on the end of the butt stock plate for comfort, but not required. All nuts should be epoxied into the body to ensure they are maintained (stock will collapse if nut on internal nut is not epoxied.)
The thumbscrew in the stock plat will need to be separated after printing, print with support and model on model support.
McMaster Carr Parts List
2 x 93635A204 - 10mm bolt, 10 mm head
1x 93635A241 - 60mm bolt, 10 mm head
3 x 91828A251 - 10 mm nut
8538K16 - ~6 inches of 3/8 in nylon rod.
EVA foam padding is preferable on the end of the butt stock plate for comfort, but not required. All nuts should be epoxied into the body to ensure they are maintained (stock will collapse if nut on internal nut is not epoxied.)
The thumbscrew in the stock plat will need to be separated after printing, print with support and model on model support.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
