Thingiverse
SENTRO Knitting Machine Replacement Legs Remix
por Worshaw
21
Descargas
28
Likes
1
Makes
Update: Minor adjustment to STL as there was a micro misalignment when parts were assembled. Should be good now.
Remix of SENTRO Knitting Machine Replacement Legs by pensky. A threaded base and tip were added and sizes adjusted to reduce the need for sanding.
Printing Instructions
Print with the threaded hole of the adapter facing up. Threads tended to sag if printed facing down. Supports are needed for the adaptor. Legs print fine without the need for supports or adhesion settings. Print with 25%+ infill and 3 exterior walls.
Post print
Sizes have been adjusted to allow for easy assembly, would recommend gluing the parts together as the tip on the legs can be a bit brittle (at least with PLA).
Remix of SENTRO Knitting Machine Replacement Legs by pensky. A threaded base and tip were added and sizes adjusted to reduce the need for sanding.
Printing Instructions
Print with the threaded hole of the adapter facing up. Threads tended to sag if printed facing down. Supports are needed for the adaptor. Legs print fine without the need for supports or adhesion settings. Print with 25%+ infill and 3 exterior walls.
Post print
Sizes have been adjusted to allow for easy assembly, would recommend gluing the parts together as the tip on the legs can be a bit brittle (at least with PLA).
Worshaw también publica en
4 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
