Sequence (5 In A Row) Board Game

I reimagined and redesigned the Sequence (5-In-A-Row) Board Game so it can be 3d printed. Sequence is a game that is played with chips, this board, and 2 decks of cards. It's a lot of fun! (link to game play instructions at end). The board is printed in 4 sections. The sections are held together by “bowties.” Once assembled, the board measures about 15"x15" (381x381mm). The thickness of the board is 3.5mm. I have considered uploading a much thinner version, that could be glued down to a piece of hardwood - if there is interest in this, please leave a comment. YOU MUST KEEP EACH BOARD SECTION ON THE PRINTER BED UNTIL IT COMPLETELY COOLS DOWN…otherwise the board will cup/bow, and you won't have flat pieces. If the sections aren't flat, they wont fit together nicely. I used glue on my print since the first layer has lots of little pieces in different colors - this may not be necessary for you. I did not use a brim to print, because I didnt want the black border to be r