Server/Network Rack - 10 inch

This rack has a 10-inch by 10-inch (aka 254mm by 254mm) footprint. It uses all standard 10-inch rack components and its height begins at a minimum of 2U (not including the fan's height) to as high as you are comfortable making it in 1U increments. Included are 2 versions of a top-mounted stand for those who wish to place their router at the top of the rack and use the fan to help keep it cooler. I have also included a blank 1U plate so that those wishing to print their own fronts have a starting point to build from.The rack is designed to use ¼-inch fully threaded rods at each corner. Myself, I used ¼-20 (~6.75mm) threaded rods (found here) with dome nuts at the top and regular nuts at the bottom complemented with some rubberized ‘feet’. The dome nuts, regular nuts, and rubberized feet were all sourced at my local Lowes store and are threaded ¼-20. I also printed every part from Sunlu PETG myself but I believe that PLA+ may also be suitable, but I did not have any on hand to test.