Servo mount

As I could not find a suitable mount for my servo, I have decided to design it myself. This model (there are two versions) mainly serves the purpose of mounting the servo to use the winch. This is the 2nd version of the model. That means there is still room for improvement, so please report any issues you encounter.
Print Settings

Material: PLA or PETG (see below)
Nozzle Size: 0.4mm
Layer Height: 0.2mm
Infill: 100% (see below)
Supports/Brims: Nope

PETG was used to print this model because I want to mount the servo outdoors (exposed to the sun). If you use the mount indoors PLA should be sufficient. For the infill, I decided to better be safe than sorry and choose 100%. However, an infill of 15% should work as well.

You need four M3x25mm screws to secure the servo to the mount. For mounting the mount you can either use M5 screws or cable ties

Additions parts:

- INJORA 35KG Digital Servo (https://amzn.to/3XuxBGL)
- M3 screws (https://amzn.to/4b6e5