Thingiverse
Servo operated leaf shutter
door jamesskelton
24
Downloads
44
Likes
0
Makes
This remix of an excellent servo operated leaf shutter added thickness to the actuating part of the shutter leafs, added a top to close it off, and adjusted the height of the motor support to better fit a standard 9g servo. A mount for a 360mm lomo process lens is also included.
To mount the gear onto the servo motor, cut away the arms from one of the servo interfaces until just the hub is left. Glue the hub into the gear and screw it onto the servo after installing it into the shutter body.
An arduino nano drives the servo and the software can be found at https://github.com/hackaninstant/Servo-Shutter, as well as the schematic and gerber files for PCB construction. A project box is included to install the PCB as well as 4 18650 batteries (2 powering the arduino, 2 powering the servo).
The software uses an I2C SSD1306 128x64 display, has shutter speeds of 1/8 to 10 minutes and Time, has a cancelable self timer up to 255 seconds, and has a configuration screen enabling you t
To mount the gear onto the servo motor, cut away the arms from one of the servo interfaces until just the hub is left. Glue the hub into the gear and screw it onto the servo after installing it into the shutter body.
An arduino nano drives the servo and the software can be found at https://github.com/hackaninstant/Servo-Shutter, as well as the schematic and gerber files for PCB construction. A project box is included to install the PCB as well as 4 18650 batteries (2 powering the arduino, 2 powering the servo).
The software uses an I2C SSD1306 128x64 display, has shutter speeds of 1/8 to 10 minutes and Time, has a cancelable self timer up to 255 seconds, and has a configuration screen enabling you t
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
