servo tray for Eclipson Cobra

This is a servo tray for the Eclipson Cobra. Use it with two of the fuselage servo mounts that come with the STL files for the plane. Assemble the servo mounts to the tray using servo screws, then glue just the servo mounts to the flat spots on the inner fuselage. The tray mounts to the servo mounts and prevents the fuselage from flexing as the servo are activated under load. it also moves the servos towards the center of the fuselage, allowing the servo arms to face towards the fuselage sides, making lining up the pushrods into the guide tubes easier.