Session mount for Hyperlow Vert racer

This gopro bracket is a front or back loader, has cutouts for all the possible interfaces (buttons, SD door, screen), and the most important part is, that it won't show the props in wide view (has 25° uptilt), but it definetly will show in superview.
No need for toilet tank batteries, my gnb-s fit well behind (72mm long).
All 5" props clear the mount, there is ~5mm space.

You will need 2x M3x30mm screws for the back, and 2x M3x10mm for the front.

Best option would be to use thin, but long 3mm diameter spacers under the back screws (pressed into the TPU), to not compress the screw holes, but to still retain the front arm stiffness. In my case, a 3mm brass tube cut down to size was perfect.
You will need 2x M3x30mm screws for the back, and 2x M3x10mm for the front.