Set 3 bookmarks Geisha Hueforge

Project: bookmarks geisha 3.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 52.72x160mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA PLA Bambu magenta Transmission Distance: 5 PLA Smart piel Transmission Distance: 7 PLA smatfil White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with negro At layer #15 (1.28mm) swap to magenta At layer #19 (1.6mm) swap to piel At layer #23 (1.92mm) swap to White for the rest.