Set 3 Bookmarks Naruto anime hueforge

Set of 3 Naruto bookmarks, with and without a hole, choose yours or print all 3 Don't forget to use the right color for each of them.   Project: naruto anime.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 45.67x160.01mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:   --------------------------- Para SASUKE; Used:------------------------------- PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PLA Bambu Cian Transmission Distance: 5 PLA smatfil White Transmission Distance: 6 Swap Instructions: Start with negro At layer #12 (1.04mm) swap to Blue At layer #16 (1.36mm) swap to Cian At layer #19 (1.6mm) swap to White for the rest.   -------------------------- Para NARUTO; Used:-------------------------------- PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA smatfil White Transmission Distance: 6 Swap Instructions: Start with negro At layer #12 (1.04mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest. -------------------------- Para SAKURA; Used: ------------------------------------ PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA PLA Bambu magenta Transmission Distance: 5 PLA smatfil White Transmission Distance: 6 Swap Instructions: Start with negro At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to magenta At layer #19 (1.6mm) swap to White for the rest.