set 4 Bookmarks magical creatures hueforge

eel free to print in different color combinations, as it will not affect the silhouettes of the magical creatures. I will print the ones you like the most, or all 4.   Sientete libre de imprimir en distintas combinaciones de colores, ya que no afectara a las siluetas de las criaturas magicas. Imprimire las que mas te gusten, o las 4   Project: bookmarks criaturas magicas .hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 51.42x159.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA smartfil black Transmission Distance: 0.4 PLA smatfil verde Transmission Distance: 2.8 PLA smatfil light green Transmission Distance: 3 PLA smatfil White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with black At layer #16 (1.36mm) swap to verde At layer #20 (1.68mm) swap to light green At layer #24 (2mm) swap to White for the rest