SG90 Mount

After looking over all of the various mounts here for something simple, effective, and without any problems slicing (quite a few other designs showed up as "not watertight" or otherwise defective when sliced with Cura), I gave up and designed my own SG90 mount. It fits perfectly. Slide the connector through the slot from the inside with the ribbon cable oriented the correct way first; the connector fits through fine, but but there's intentionally very little clearance. I printed it at standard quality with support structures (for the slot) on an Enders 3 S1 without any issues at all.

I used the mount as part of an indoor antenna rotator project based on a Hoverman-style antenna mounted on a 3/4" PVC pipe pole, a few gears, brackets, and cone and needle bearing I designed and printed, a NodeMCU ESP8266 board, and an SG90 micro server. It works great, and I might get around to posting that design eventually.