Shadowbox/Hueforge Stranger Things

Un mix fra l'arte delle shadow box ma formata da 5 hueforge ispirato alla locandina della famosa serie Stranger Things PARAMETRI PER OGNI PIATTO: ---1---Project: logo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 191.89x239.86mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.67998mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ff0000 PLA+ #DEEPLEE Basic Red Transmission Distance: 8This print uses 2 unique filamentsSwap Instructions: Start with PolyLite Black At layer #8 (0.72mm) swap to #DEEPLEE Basic Red for the rest. ---2---Project: 1 alberi.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 191.89x239.86mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 0.48mm #000000 PLA #eSUN Basic Black