Shapeoko3 Mount for JTech Laser

The [original JTech laser mount for the Shapeoko3](https://jtechphotonics.com/?page_id=3145) is convenient but reduces the X-axis and can wiggle on direction changes. This model allows the laser to mount in the router clamp and is more rigid. The trade-off is not having a magnetic release in case the laser housing collides with something.

Additional parts:
4x - M3x20 screws

Instructions:
1. Unscrew the 40x40 fan from the laser housing, the fan will remain in the same position
2. Using the longer 20mm screws, attach the printed mount to the fan and laser housing
3. When mounting to the Shapeoko3, put the laser cables through first then the laser mount