Shark Byte | Five33 Switchback Pro Canopy / Pod

### Work in progress - needs stiffening to reduce vibrations
## Pod to mount Shark Byte VTX-S on Switchback Pro
Designed to allow mounting the whoop board inside the very small Switchback Pro. I also wanted to fit a large micro-sized camera/M12 lens inside for better picture quality. Choose between different camera angles - I've only tested the 45deg variant

## Printing
* Print in downloaded orientation
* Use Cura Tree Supports
* 0.2mm, 3 walls

## Installation
* Cut stack screws down to 21mm to make clearance for the VTX-S mounted to the underside of the canopy.
* Use 4 M2 screws to mount VTX-S
* Place 2 M3 nuts inside hex-cutouts at front mounting holes

## Customize it to your liking!
Design is fully parametric - change any number of variables at top of design tree to adapt this to a different frame or camera:
https://cad.onshape.com/documents/75ae699a2132a4132cb4ed0f/w/e0a499b2554ad9ca201badff/e/53e67ceaebb9caa1ed299b68
Create free "hobbyist" account on Onshape to