Sheet Music Stand

Music Stand for a microphone stand!

We needed a sheet music stand but didn't want to wait. I had a microphone stand sitting around that needed a good use.


Parts
---------------------

All pieces are printed with PLA though PETG might be a better option depending on use
Parts used:
* 2 - 5MM nuts
* 1 - 16mm long, 5mm bolt
* 1 - 50mm long, 5mm bolt
* 1 - Washer
* 4 - 1/2inch long, #8 flat head bolts and #8 nuts (this is just what I had on hand)
* 1/4 inch (~5mm) thick Plywood
* I used the following dimensions:
* Desk: 17in x 11in or 432mm x 279mm
* Lip: 17 in x 2.25 in or 432mm x 57 mm

Assembly:
---------------------

Use the center markers on the print to center the part on the plywood.
Mark, drill, and countersink holes appropriate to the size of the bolt used.
The bolts I used were flat head so they would sit flush with the desk.

Insert the 16mm, 5mm bolt through the center of the desk mount
Attach desk to desk mount using the 4 bolts
Attac