Shelby Cobra

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 PLA+ Numakers Dark Gray Transmission Distance: 4.8 PLA+ Numakers Pure White Transmission Distance: 4.8This print uses 3 unique filamentsSwap Instructions: Start with Pitch Black At layer #14 (1.2mm) swap to Dark Gray At layer #21 (1.76mm) swap to Pure White for the rest.