Shelf Spool hanger

Update 6.2.2020:

-Added a printable "Spool Roller" for filament spools, that can be used with 6700zz bearings. Will work without bearings aswell :)

-Also added a "Hanger Locking Block" to set a fixed distance of 13.5mm between the hangers, that can be locked with wood screws or M5 bolt.


04.02.2020:

Needed a shelf hanger for filement spools, so I made my own.
Should fit shelf from 14-43mm with use of the different spacers included.


-Print the holders and choose the spacer you need for your shelf! :)

Hardware needed:

*10mm axle that fits the design of the hangers.
I bought a length "bathroom" 10mm zinc plated copper pipe, and used it as an axle, and cut it to 18.5cm.

*optional: 2x 6700zz bearings if you want a roller with bearings.
Note: Be careful when assembling bearings on the axle/ bearing housing. Use proper tools for this, as the bearings are small and will seize if not assembled correct

2x M5 bolt or 2x 4mm wood screws for "locking block".