Shelly case for roller shutter operation

For usage with a Shelly 2.5 and roller shutters with local operation via push buttons. The case contains the Shelly and 2 push buttons to open and close when you want to operate them locally.

There are 2 models: 1 with the cables on one side and another one with the cables on both sides. Select what is approprate for you.


Print settings:
• Print material: PLA
• Rotation of the objects: No comment.
• Support: No
• Skirt, brim: Skirt.
• Infill: 20%

Additional instructions
• See the cabling instructions of the Shelly 2.5 for roller shutters.

Materials needed
• PLA
• 2 x M3 bolt 3 x 6 mm
• 2 x M3 brass insert nut 5mm
• 1 x black push button 230V~ 11,5mm diameter (close)
• 1 x white push button 230V~ 11,5mm diameter (for open I found it logical to use white)
• Some wires AWG 20



Version 0.7
• Shortened the box on the width side with all modifications that were needed to make it fit.
• Enlarged the gaps for the switches with .1mm
Version 0.6
• The position