Thingiverse
Shelly Plus 1 Mini UART Flash Holder
von aktendully
4
Downloads
5
Likes
0
Makes
This holder keeps connectors in place to flash a Shelly Plus 1 Mini via UART.
The bores allow to use simple male bare metal Dupont connectors.
Remove the plastic housing from the male Dupont connector.
Insert the metal connectors to the respective bores as deep as required.
Bend and adjust the connector pins to touch the Shelly Plus 1 Mini pins.
The pinout and an example how to flash ESPhome is given here:
https://devices.esphome.io/devices/Shelly-Plus-1-Mini
The bores allow to use simple male bare metal Dupont connectors.
Remove the plastic housing from the male Dupont connector.
Insert the metal connectors to the respective bores as deep as required.
Bend and adjust the connector pins to touch the Shelly Plus 1 Mini pins.
The pinout and an example how to flash ESPhome is given here:
https://devices.esphome.io/devices/Shelly-Plus-1-Mini
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!