MakerWorld
Other Art Models
Voir le modèle
Sheng-long
23
Téléchargements
20
Likes
9
Makes
As well as my other models you can resize this in X and Y but not in Z Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x197.71mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Silver At layer #18 (1.52mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
