Sherpa Mini Smart Effector Mount

Works up to 300mm diameter printing area.

Check out the Sherpa mini extruder by Annex Engineering.
https://github.com/Annex-Engineering/Sherpa_Mini-Extruder

Feel free to remix the mount.

Print setting I used:
Material: ABS (the extruder gets hot)
Perimeter: 4
Top/bottom: 5
Infill: 40%

Would like to achieve 400mm diameter, so this is just the first release. Use at your own risk. It's been designed to work with the smart effector so you'll need one or redesign it to work with your effector.