Shin Chan Heart Pose

⚠️ This file is already configured and ready to print. You only need to slice and print. If your settings become modified or you want to verify the configuration, please use the following values: Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.1 mm. The model is 150 × 200 mm in size. You may print at higher layer heights below the Base Thickness of 0.5 mm. Max allowed Thickness: 2.02 mm Actual Thickness: 1.16879 mm Filaments Used This print uses 2 unique filaments: #000000 PETG JAYO Black Transmission Distance: 0.3 #FFFFFF PLA BambuLab Basic Jade White Transmission Distance: 5 ⚠️ It appears this project uses mixed filament types. Please ensure this is intentional before printing. Swap Instructions Start with Black At layer #8 (0.66 mm) → swap to Jade White for the remainder of the print Recommended Notes No supports required Smooth plate recommended Keep 100% infill enabled Avoid changing Hueforge color transitions unless intentionally modifying the artwork