Shinobu Kocho

Project: shin 3.hfpPrint at 100% infill with a layer height of 0.15mm with a base layer of 0.31mmThe Model is 92.4x199.98mm in sizeYou may print at higher layer heights below the Min Depth of 0.61mmThe Max Depth is 2.3mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Grey Transmission Distance: 1 PLA Hatchbox Purple Transmission Distance: 2.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #3 (0.61mm) swap to Black At layer #4 (0.76mm) swap to Grey At layer #6 (1.06mm) swap to Purple At layer #7 (1.21mm) swap to Jade White for the rest.