Thingiverse
Shisha/Hookah (configurable)
di Genunix
45
Download
39
Likes
0
Makes
Simple 3d printed hookah, you will need:
- 3d printer
- PLA fillament and ideally flex fillament if you want better sealing
- hose (default values fits hose of 1cm diameter or you can use hose of some original shisha)
- pot as this is only piece that you cannot print (PLA and any other plastic would melt)
If you want to customize, download shisha.scad.
Otherwise get following parts:
- shisha_body.stl
- shisha_tube.stl (this one needs supports :-/)
- shisha_hose_end.stl (not needed if you have existing hose, print with flex for best result)
**TODO:**
- redesign tube to print without supports
- design nice mouth end for hose
- enhance vase with some decorations
- 3d printer
- PLA fillament and ideally flex fillament if you want better sealing
- hose (default values fits hose of 1cm diameter or you can use hose of some original shisha)
- pot as this is only piece that you cannot print (PLA and any other plastic would melt)
If you want to customize, download shisha.scad.
Otherwise get following parts:
- shisha_body.stl
- shisha_tube.stl (this one needs supports :-/)
- shisha_hose_end.stl (not needed if you have existing hose, print with flex for best result)
**TODO:**
- redesign tube to print without supports
- design nice mouth end for hose
- enhance vase with some decorations
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
