SHOK.WAV

This is my interpretation of Shok.Wav. He is a fairly fast print since there is very little AMS usage (printable without AMS up to you). Standard size is approx. 200mm from head to tail 150% size is approx. 300mm from head to tail Please keep in mind this print requires lots of gluing “gear and bearing, etc.”, each need to be glued in place. if your not comfortable gluing this may not be the print for you (please do not leave a low rating because you have lots to glue lol). tolerances were difficult to get correct on items such as eyes although i have printed him several times to insure everything prints correctly for you ( if there is any issues feel free to message be prior to feedback ill do my best to help solve them for you). Glue in place items: 1. gears and bearings : there are a lot of them. I have positioned them on build plate so you know where they go after you print them, use the body of the shark as a reference (see pic). <img src="https://makerworld.bblmw.com/makerworld/m