Shower Caddy

The shower caddy model is designed to be hung from a 0.75in diameter showerhead pipe and hold your soaps. The top shelf is for taller bottles, and the bottom shelf is for bars of soap. The design is split to fit a 12 inch build sheet. The two channels are made to connect the two side supports to the upper hanger/support. There are small rectangular blocks designed to hammer through the holes in the connector and supports. If you prefer a loose fit with glue, reduce the width and heighth of those blocks by 0.01inch. The shelves snap fit into the supports, but I recommend glue to be sure they don't come apart. Make sure the glue is made for whatever filament you use. I reccomend PETG and superglue.