Shrinkage test cube - Calibration

Description:This model is a simple 25mm x 25mm x 25mm calibration cube designed to help you check the dimensional accuracy of your 3D printer. Each face of the cube is clearly labeled with the corresponding axis (X, Y, or Z), making it easy to identify and measure the printed dimensions.Instructions:Print Settings: Use the provided print profile for optimal placement and settings. This ensures the cube is oriented correctly on your print bed for accurate measurements.Printing: Print the cube using your preferred filament.Measurement: After printing and allowing the cube to cool, carefully measure the dimension along the X-axis using calipers or a precise ruler.Shrinkage Calculation: Calculate the percentage of shrinkage using the following formula:(Measured Dimension / 25mm) * 100For example, if your measured X dimension is 24.8mm:(24.8mm / 25mm) * 100 = 99.2%This result indicates a 0.8% shrinkage in the X-axis.Repeat for Y and Z: if desired, measure the Y and Z axis, and do the same c