SHURE SM57 pop filter

You have two options. The first is to print the frame and use your own thin foam between the rings. The second way is to print the rack and apply a pop filter from another microphone.


Pop filter to Shure SM57

You need to print:
1x popring_external
1x popring_internal
3x clamp
3x frame

You need the following items for first option:
- all printed items above
- 3x bolt 3x14mm
- 3x nut 3mm
- 1x 4 mm thick sponge
- superglue

I bought the HEPA vacuum filter from ALXPRSS with 4mm carbon sponge between.

or for second option:
- all printed items above without popring_external.
- 3x bolt 3x14mm
- 3x nut 3mm
- superglue
- pop filter from another mic (I used a pop-filter with an internal bore diameter of 50 mm from a Rode NT1)