MakerWorld

Gadgets

Shurikens

by M&C Designs · Gadgets

22 Downloads

9 Likes

13 Makes

Hello, This is my first Shuriken design, I hope you like it!Prints without supports, 2 hour print all on the same plate!

print in place Shuriken shurikens ninja throwing star fidget game toy

Category

Gadgets

Source

MakerWorld

Published

14.02.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

print-in-place design · no supports

Support-free Print-in-place

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Shurikens need supports when printing?

Nope — Shurikens is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Shurikens?

According to the design notes, Shurikens takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Shurikens available in?

Shurikens is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Shurikens free to download?

Yes, Shurikens is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Shurikens

Similar Models

Add to Collection