Siberian Tiger Hueforge

Really Nice Siberian Tiger Hueforge Print, only uses four colors and can be done without AMS you just have to build pauses in and swap out filaments. EYES DO NOT PRINT BLUE - BUT STILL LOOKS GREAT IN GREY SCALE - never stated they would and the print never did show this but had a few people complaining - not reading so CLEARLY STATING THISI have tried several times to get the eyes to pop and retain the rest of the detail, but have not succeeded in anything that I'm happy with. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200.36mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Silver Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:Start with CharcoalAt layer #10 (0.