Sieg SC4 Front Panel

New front panel for the Sieg SC4 bench lathe, that uses physical buttons rather than the membrane keys it has as stock.

This modification requires the removal of the selector mechanism that allows the spindle to be stopped whilst the lead screw is still powered. This is for the optional milling attachment that can be fitted to this lathe; I don't have one nor need one - so I removed it. In doing so it leaves a hole from the front electrical box to the interior of the headstock - the plug STL is fill this opening to prevent any dirt or oil from getting into the front.

The front paned has three parts - the main panel, a spacer for the buttons and a bezel. It should be fairly obvious what and where these parts go, but check the post printing for the assembly order.

The buttons used are these:
https://www.amazon.co.uk/gp/product/B083K2821B/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

And the emergency stop is this one:
https://www.amazon.co.uk/gp/product/B094FBG1MB/ref=pp