Silicone mold-eufyMake E1 - Large Flatbed w/ jigs

I finally found some time to add large bed silicon mold for eufyMake E1 UV printer. I've seen similar one on YouTube but this is my own version.The design contains mold and jigs. It does have a 2 10mm rasters shifted by 5mm for more flexibility of jigs. I split the model into 2 parts so you can print it out on smaller printers. Assembly is simple. Combine 4 parts. Glue the parts and put the blue scotch tape on the back. I've used UV cured resin as a glue. Make sure you dry the resin first ( i did a mistake and resin reacted with liquid silicone that I had to clean up - you can see the marks - these are because my mistake when making mold - don't have enough silicone to repeat the process ) and make sure it lays flat. It might be a good to use double sided tape to glue the form to the flat surface like floor or desk. I've used blue silicone rubber 25 Shore A from Chinese store. I used around 1kg (2x500g) of the silicone.