Silicone Wipe with Brush

This should be printed in ABS or ASA to prevent warping under higher chamber temperatures This is a remix of Brenyo's silicone nozzle wiper, I have 2mm silicone on hand and not 3mm, so I modified the slot to accomodate what I had. While I was at it I also added a place for the A1 Mini nozzle brush to sit in for extra wiping action, just cut the brush down to where it is 3 bristles long (approximately .250" or 6.5mm) and glue them in place as pictured I uploaded 3 different models for your choosing, one with just the silicone sheet for a 2mm thickness and no brush, and then 2 with the A1 Mini brush installed with either 2mm or 3mm sheets. The sheets need to be cut 12mmx14mm just like the original. Here are some links for the silicone sheet I have (2mm) and the A1 Mini Brush 2mm Silicone- https://www.amazon.com/Silicone-Kitchen-Countertop-Protector-Stick15-7/dp/B08N39711H/ref=sr_1_1_sspa?crid=362TV2WLHMKGG&keywords=2mm%2Bsilicone%2Bemolife%2Bmat&qid=1706620328&sprefix=2mm%2Bsilicone%2Bem